Last updated: December 26, 2013
Welcome visitor, you are currently not logged in.    Log in »    »

Mosaicbond TWO PACK, FLEXIBLE, GLASS MOSAIC ADHESIVE/GROUT-CONSTRUCTION CHEMICALS

Mosaicbond-TWO PACK, FLEXIBLE, GLASS MOSAIC ADHESIVE/GROUT-
CONSTRUCTION CHEMICALS
.

DESCRIPTION
MOSAICBOND is a two pack, premium grade, internal and external floor and wall adhesive with exceptional
performance. MOSAICBOND is formulated to allow the bonding and grouting (1mm-5mm joints) of mosaics in
one application. Can be used on many different surfaces i.e.: fibre cement sheet, particleboard, concrete, ceramic
tiles and smooth concrete.
FEATURES
• Exceptional adhesion – suitable over a number of difficult to bond to substrates.
• Waterproof – ideal for water features and full immersion.
• Flexible – accommodates normal building movement.
• White (ideal for glass mosaics) and colours available.
• High initial adhesion – reduces the need for support in wall tiling applications.
• Allows tiling and grouting of mosaics in one process.
USES
A two pack thin bed internal external floor and wall adhesive for fixing and grouting mosaic tiles over most
substrates eg cement render, fibre cement sheets, plasterboard, existing properly prepared ceramic tiles and
Construction Chemicals waterproof membranes.
COVERAGE (approximate)
8lts of liquid mixed with 20kg of KEMGROUT FLEXIBLE will cover approximately 6-8m2 depending on grout
joint width and bed thickness.
SURFACE PREPARATION
The surface to be tiled must be structurally sound and clean, free from laitance, release agents, curing
compounds, dust, waxes, paint and all contaminants. Prime porous substrates, cement sheet, building boards
and up to 32 Mpa concrete with PRIMER AND GROUT ADDITIVE. New concrete must be 28 days old.
Concrete swimming pools to be primed with PRIMAX. (Mix MOSAICBOND with KEMGROUT SANDED).
When using glass mosaics in fully immersed conditions check with the tile supplier as to the suitability.The
adhesive used to fix the mesh to the back of the mosaic may swell and breakdown under these conditions.
Ensure that no more than 10% of the back of the sheet of mesh mounted mosaic is covered by the substance
used to adhere the glass mosaic to the mesh.
MIXING
Mix 4 litres of MOSAICBOND liquid with approx. 10kg of KEMGROUT FLEXIBLE or approx. 15kg of
KEMGROUT SANDED to a thick creamy consistency. Pot life is approximately 1 to 2 hours @ 23c 50%
relative humidity.
SET TIME
Approximately 24 hours, depending on temperature, humidity and substrate porosity.Allow longer for dense
tiles. Swimming pools allow 4 weeks before filling pool.

APPLICATION: Adhesive & Grout
Apply the adhesive using one of the following methods.
1. Using a 6mmx6mm notched trowel apply mixed MOSAICBOND to the substrate. Place the mosaic sheet face
down and fill the grout joints by buttering the back of the sheet. Place the mosaic sheet face down and fill the grout
joints by buttering the back of the tile. Place the mosaic sheet and bed onto the surface using a flat wooden sheet
(that is slightly larger than the mosaic sheet) to level the sheet. Clean up excess adhesive and repeat with following
sheets.
2. Using a 10mmx10mm notched trowel apply the mixed MOSAICBOND to the substrate. Place the MOSAICBOND
onto the adhesive forcing adhesive into the grout joints then top up grout with a rubber grouter until filled and
flush. Clean up excess adhesive and repeat with the following sheets.
The final bed thickness must not be less than 2mm for walls and 3mm for floors, to accommodate movement. Spread
1m2 at a time; do not allow the adhesive to “skin” bed the tiles while the adhesive is still wet on the surface. Press
mosaics firmly into the adhesive ensuring full bedding of the mosaics.Allow the adhesive to come up between the grout
joints so grouting can be done at the same time, use more adhesive if required to grout as tiling is being done. Clean
adhesive off the tile face before adhesive dries.
GROUTING
Remove surplus grout with a damp cloth or sponge. Do not allow the MOSAICBOND to harden on the face of the
tiles.When a haze forms over the tile polish carefully with a dry cloth.
SHELF LIFE
1 year. Store in a cool dry place out of direct sunlight.

Full  Technical Data Sheet at: http://www.constructionchemicals.com.au

Sydney
2/31-33 Newton Rd, Wetherill Park
New South Wales
Ph: (02) 9756 3533  Fax: (02) 9756 3534

Keywords: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,




TileShop 0800TilesIN CanadaTiles TileAustralia 0800TILE TilerAustralia 0800TILESCOM 0800tilesNZ Tiling TilesAmerica TilesNewYork 0800tilesUK LATiles Tiler
Ducati848 DDUCATI YAMAHAR6 TILESTORE HondaCBR BathroomDesign OpeninghoursWS TilesChicago WDPage NZVisitMe 027Directory LipstickNlasH
700JetSki 900 bikes Boats LovechToday Melbournetileshops 101AKO Lovech V12 Fishoogle YourLove 359BG Rabotno 52 News AustraliaCarpet Ottyk
KawasakiNinja 0800tiler Ducati1198 Interiors ShopsSydney TileStore 1198 ChicagoTS TilesNZ StoreHours OpeningHours Adhesives Jet-Ski
TShops Grout CCCodes TSydney OPENINGHOURZ TSAustralia Builder TopJetSki Plumber WhiteTiles BlackTiles NYTShops Tadhesives
LondonTS TorontoTS Brisbane ChicagoTS LSstores JetSkiW TilerNZ HOUSTONTS SydneyS LondonUK TadhesiveNZ AtilerNZ BBathrooms
CarpetC HoursNZ Fishing JetSki LovechD UKTS SPORTBIKE TstoresINFO EuroexINFO Paint CURTAINS TadhesivesUK